The D71CN is 1.4” high frequency compression driver, which features a carbon composite dome and high damped vented suspension, providing high output with very low distortion and very good response from 700 to 17500 Hz. The voice coil assembly is easily fielded replaceable without soldering. The D71CN driver offers all the benefits of new line of OBERTON drivers at reduced cost and weight.
OBERTONFerrite
OBERTON D71CN
1.4” High Frequency Compression Driver, 2.85” voice coil, 100 W, 108.5 dB, 8/16 Ohm
| Brand |
OBERTON |
|---|---|
| Condition |
New |
| Power |
100W |
| Tweeter Diameter |
1.4" |
| Magnetic Material |
Ferrite |
Description
KEY FEATURES
- Throat diameter: 1.4″/36 inch/mm
- Impedance: 8 / 16 Ohm
- Power Capacity: 100 W
- Program Power Capacity: 200 W
- Frequency Range: 500 Hz – 17.5 kHz
S P E C I F I C A T I O N S
| Throat diameter | 36 mm (1.4 in.) |
|---|---|
| Nominal impedance | 8 / 16 Ohms |
| Minimum impedance | 8.35 / 11.7 Ohms |
| DC resistance | 6.73 / 10 Ohms |
| Power capacity | (1-20 kHz) 100 W |
| Program Power Capacity | (1-20 kHz) 200 W |
| Sensitivity | (1 kHz – 10 kHz) 108.5 dB/W/m |
| Frequency Range | 500Hz-17.5 kHz |
|---|---|
| Recommended crossover | 1 kHz or higher 12 dB/oct.min |
| Voice coil diameter | 72 mm (2.85 in.) |
| Diaphragm | Carbon Composite |
| Voice coil material | CCAW |
| Voice coil former | Kapton |
| Flux density | 1.6 T |
Reviews (0)
Reviews
There are no reviews yet.